I took a look at each hitch for your 2002 Ford F-350 Super Duty, and was able to find one option for a Class V hitch that will work with a spare tire, and is near flush with your bumper, which is the Draw-Tite Trailer Hitch Receiver # DT45508.
This hitch will require you to remove your factory hitch, and in regard to keeping it tight to the frame, the brackets are, but the hitch tube is below the bumper (I'm not sure if by "tight to the frame" you meant you wanted the crosstube to be concealed).... view full answer...
I contacted Curt Manufacturing, they confirm that this is the best kit, the Curt Custom 5th Wheel Installation Kit for Ford, # C16424-204, for your 2011 Ford Super Duty F-350. They were cautious while using the current Firestone # F2597 air bags. However, when discussing with Tech at Firestone they have no exceptions listed for the Firestone # F2597 being used with base rails on the 2011 F350 Super Duty. They have listed as compatible with most base rail kits.
I find no exceptions... view full answer...
The Ford Replacement OEM Tow Package Wiring Harness part # 118243 is indeed a fit for a 2000 Ford F-250. It will replace the 7-way trailer connector as well as part of the trailer wiring harness from the square pigtail onward. I would not have any options to replace any part of the factory trailer wiring harness up to the square pigtail. view full answer...
In this case, the Reese Elite systems are created the same and I do believe that the system you've got in a 2011 Chevy Silverado is going to be the same as the one that's in the 2011 Ford; that system is designed to recreate the Ford OEM pucks similar to the way the # RP30126 will. For this reason you should be able to use the B&W Companion for Ford OEM pucks # BWRVK3300. I would measure the distances between the pucks and if they're exactly the same 13" x 30" then you can use that # BWRVK3300... view full answer...
Yes, if you have the B&W Universal Base Rails # BWRVR3210 installed on your truck the Curt Above-Bed Gooseneck Trailer Hitch # 16055 will mount to them without issue. This gooseneck hitch is designed to attach to industry-standard above-bed base rails like these to provide you with a 2-5/16" hitch ball for towing a gooseneck trailer.
The Curt Above-Bed Gooseneck Hitch features a 25,000 pound towing weight capacity and a 3" offset to help with cab clearance. I have attached a short video... view full answer...
I reached out to B&W regarding the issue you are having trying to remove the B&W Companion 5th Wheel Hitch # BWRVK3500 and was told that on occasion the pin becomes bent when the bolt is torqued down, and what you will need to do is drive it out from the passenger side. They said it is a possibility that the pin has become bent, and sometimes if it is not fully engaged when it is installed, this can occur, and if you can drive the pin out you'll be able confirm this was the issue. view full answer...
You can use the Curt T-Connector Wiring Harness, # C55243, or the Tow Ready Replacement 7-Way Harness, # 118243, on your 1999 Ford F-250 Super Duty. These are basically the same item for your truck made by different manufacturers.
If the price point of the Curt harness is more appealing to you, then there is no reason why you cannot use that harness.
There is one thing you will want to keep in mind when installing either of these harnesses, do not forget to install the relays and fuses.... view full answer...
For your 2007 Ford F-250 with a gooseneck hitch I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2400 if your truck is 4WD, or the # F2398 if your truck is 2WD as they are the only option for your truck with an in-bed hitch.
These kits both have a 5000lb load leveling capacity which is the most common option as the only weight from a trailer that counts towards this is the tongue weight, and most people are not carrying 5000lbs in the bed of their... view full answer...
For your 2020 Forest River Wildwood Heritage Glen 290rl Fifth Wheel I recommend product # LCV000168325 for the bedroom slide, product # LCV000177334 for the kitchen, and product # LCV000168109 for the dinette. These products are manufacturer recommended as well even though you're tight on space between the flange and the awning arm. All listed products are Solera brand and come in black to match your camper's aesthetics. view full answer...
It is always a good idea to tow a trailer as level as possible. The best way to determine what height fifth wheel hitch you need is to take a couple measurements. With a lift kit on your F-350 it can make hauling a fifth wheel trailer level more difficult to accomplish.
You want to park the trailer and truck on level ground. Measure the distance from the floor of the truck bed to the ground and then measure the distance from the bottom of the pin box skid plate to the ground. The difference... view full answer...
First, the Curt above the bed rails and installation kit like # C16443-104 for a 2004 Ford F-250 short bed, will accept the Reese slider as long as it is the type of hitch that does fit in above the bed rails.
I recommend that you do not fabricate the gooseneck hitch to work in the 5th wheel install kit because neither component has been tested for this application and that makes the capacity unknown for 5th wheel or gooseneck towing. The solution is to use a gooseneck plate in the above... view full answer...
The Firestone Ride-Rite Air Helper Springs # F2550 in conjunction with the Reese Quick-Install Custom Brackets # RP50082 should be able to be installed without interference.
The mounting brackets for the Firestone Ride-Rite # F2550 attach to inboard side of your 2003 Ford truck frame. The Reese Custom Brackets # RP50082 mount to the outboard of your 2003 Ford truck frame.
The Reese Custom Bracket has a square hole in the center of the bracket and this should line up on to the hole on... view full answer...
I verified with TorkLift for you that the correct tie-downs for your 2012 Ford F-350 Super Duty with an 8 foot bed and factory installed hitch are the following:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2016
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3006
Installing these tie-downs do not require drilling, and the total price is for the front and back tie-downs together. I added a review for you from one of our customers who used these same tie-downs... view full answer...
According to my technical contact at Ultra-Fab, the steel extension kit # UF19-950002 will work with your Ultra-Fab Tripod Stabilizer # UF19-950500.
The extension kit gives you an additional 8 inches for your tripod. view full answer...
Unfortunately, the BAKFlip G2 for your 2012 Ford will not fit the 2004 Ford F-350.
The correct G2 model for your son's 2004 Ford F-350 8ft bed is part # BAK26304. view full answer...
The correct TracRac SR ladder rack for your 2008 Ford F-250 Super Duty 6-3/4' bed is part # TH43003XT-510. If you want the over-the-cab extension then you need part # TH43003XT-510EX instead.
Either option will sit 28-15/16" high (including the base rails) and will work great with the Toolbox Mounting Kit # TH25200 that you already have.
I have attached some review videos for you to check out. view full answer...
Yes, the Spectro junction box can be used in your tow vehicle for making wiring connections. This part has a heavy-duty weatherproof plastic housing and includes grommets and cable clamps. You will need to supply two nuts, washers and 1/4-inch bolts of the appropriate length to install the box on your vehicle.
I have linked a video showing installation of this part on a trailer frame. The housing measures 3-1/2 x 2-1/4 x 7 inches.
In case you need connectors or wire for your splicing... view full answer...
The Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter # BD0289650300 that you referenced was designed to fit most standard, square outer tube gooseneck trailer couplers so it should work for you.
You can verify that it would work by comparing the outer dimensions of this product with the current outer tube of your trailer. This has a 4 inch by 4 inch outer dimensions and should fit in the outer tube of your trailer. view full answer...
Yes. The Bulldog Winch Mounting Plate # BDW20008 is a universal winch mounting plate, so it can be used on a 2012 Ford F-250. You will need to drill and mount this plate to a sturdy location on the frame of the truck and you'll want to source the mounting hardware locally, since this plate does not come with any included. view full answer...
Go To Results